Calcium Carbonate Drier Machine Rotary Flash Dryer/Spray Dryer/Drum Dryer/Drying Machine, Spray Dryer, Belt Dryer, Vibrating Fluid-Bed Dryer,

Products

HomeHome / Products / Spray Dryer / Details
Calcium Carbonate Drier Machine Rotary Flash Dryer/Spray Dryer/Drum Dryer/Drying Machine, Spray Dryer, Belt Dryer, Vibrating Fluid-Bed Dryer,

Calcium Carbonate Drier Machine Rotary Flash Dryer/Spray Dryer/Drum Dryer/Drying Machine, Spray Dryer, Belt Dryer, Vibrating Fluid-Bed Dryer,

Overview Hi, I am Joanna And now working for Jiangsu zhenxing drying equipment co.,ltdI know you are looking for good-qu

Send your inquiry

DESCRIPTION

Basic Info
Model NO. XSG
Material Status Bulk, Filter Cakes
Drying Medium Superheated Steam, Air
Operation Pressure Atmospheric Pressure
Material Aluminum Hydroxide
Inlet Temperature 250-300ºC(Adjustable)
Outlet Temperature 70~80ºC
Output Capacity 10000kg/8hour
Heat Source Direct Gas Furnace
Transport Package Seaworth
Specification 5-5000kg
Trademark ZHENGAN
Origin Changzhou
HS Code 8419399090
Production Capacity 4 Sets/Month
Product Description

Hi, I am Joanna

And now working for Jiangsu zhenxing drying equipment co.,ltdI know you are looking for good-quality dryer equipment.

Any questions about the drying machine feel free to contact me, I would like to offer you full technical support andonline video service, it will help you to know about the full drying system very well.

So our company can be a good choice, WHY?

Product Description

Introduction

XSG model spin flash dryer is designed by ourselves. The hot air enters the dryer chamber from the bottom of the dryer host, it's going into the dryer chamber by the inlet entrance. The rotor at the conical base of the drying chamber fluidity products particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated.Using the heat from the air stream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters.Typically, cyclones are followed by scrubbers or bag filters for the final cleaning of the exhaust gases to meet current emission requirements.Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the airflow for further drying and powdering.

The advantage compared with the others
2.1 Adopt 2 lines tangential air enter into volute at the best position, it will improve or remove blind Angle of wind and also the wind in the weak2.2 Be good at controlling the powder's moisture, fineness, and hold time. for control the speed coordinating and unifying at spinning disk work with wind-enter, it can ensure the outlet wind with low temperature, it will also reduce the energy consumption.2.3 The special alloy steel be used in the rotary blade, the layout structure with unique, it has the character of small erosion, contact surface wide, cutting force strong.2.4 Adopt the newly leak-proof structure; the main engine bearing life will be delayed and the bearing black with the cooling device.2.5 In order to ensure the powder water content is less than 0.5%, so increase the height than the original basis, it is also equipped with a spinning disk, which will make the powder quality and particle size meet your requirement.Due to the gas-solid corresponding relative velocity big, even though the mix temperature is around 80~90ºC, the powder temperature is still below 45ºC condition, it will help to pack and save energy.

You may be interested in the following information:

  • Detail of equipment, instruments. Brands.
  • Detail of the construction material.
  • Detail of automation
  • Whether or not it includes assembly.
  • Startup and guarantees.
  • Process parameters.
  • Percentage of product loss.
  • Quality parameters of the final product.
  • Recommended operating time between power line CIP ("Clean In Place").
  • Information plans for civil works, indicating necessary dimensions and levels, loads on slabs and bases, etc.
  • The layout of the installation.
  • Instruction manual for operation and maintenance.
  • List of spare parts.

Product Parameters

Equipment design conditions
Material and liquid conditions

1Materialaluminum hydroxide
2Inlet temperature250-300ºC(adjustable)
3Outlet temperature70~80ºC
4 Output capacity10000Kg/8hour
5Material Contact part SS304
6Heat sourceDirect gas furnace

Detailed Photos

Process conditions

Application Scenario


After Sales Service

Installation and Commissioning and Training:

1. Buyers arrange installation and debugging by themselves under a manual book from the supplier.2. If the buyer requires engineers from the seller's party, the buyer should arrange the following items:(A)Within 30 days after the machines are delivered to the buyer's factory, the buyer shall inform the seller to arrange engineers to the buyer's factory for installation, commissioning, testing, and training of machine operators.(B)The buyer should provide the engineers(1-2 person) the boarding and lodging, transportation during the engineer's stay in the buyer's country, and round trip air ticket and visa fee for the engineers. Besides, the buyer should pay the money as salary for one engineer per day.

Product Presentation

Project


Company Profile

ZHENXING was founded in 1993. We are specialized in the development and manufacturing of dryers, mixers, granulators, grinders, and etc. Our company has cooperated with a number of research institutions since 2007 and we have established the largest sludge drying equipment testing center in China. All Dryer is widely applied in all kinds of industrial fields.We are certified with the ISO9001 quality management system. We follow a strict quality control procedure and we provide high-quality products with prompt after-sales services and technical supports.Our drying equipment has been exported to North America, Pakistan, India, Vietnam, Russia, and other countries.I am a trustworthy and reliable industrial dryer specialist, a leading manufacturer of drying fields based in Changzhou China. With more than 10 years of experience in designing and fabricating the dryer machine.I understand that drying technology and quality are the key to meet with the production capacity requirement, and the dryer working performance well is our aim, which is why in DRYING TECHNOLOGY I always put the needs of our clients first.



FAQ

What do I do?

I am focusing on providing the industrial drying system, which includes the spray dryer, flash dryer, drum dryer, vacuum harrow dryer, high-temperature rotary calcining dryer, mesh belt dryer, continuous tray dryer, pigment production line.Our related factory has extensive experience in exporting to the USA, Russia, Malaysia, India, and North America.

Why choose me?

To provide you with the most cost-effective drying solutions.Offer you 24hour online free technical support.Offer you full support on design, fabricate, installation service.The updated production schedule is for you in real-time.